List of Clients

La Tondeña Distilleries, Inc.
Coca – Cola Bottlers, Inc.
Hoc Bee Foodline
San Miguel Foods, Inc.
Grain Handlers, Inc.
Philippine Foremost, Inc.
Progressive Farms
RICO Philippines
Florian Laundry
Feedmix Specialist, Inc.
Vitarich Victorias Milling Corporation
Foodsphere, Inc. (CDO)
Jollibee Foods Corporation
SMC Beverage Packaging
Tyson Agro

Product Description

The Enertech Anzen 3-Pass Wet-Back Package Fire Tube Boiler is an economically priced model available in capacities from 60 to 600 HP (940 to 9400 kg/hr) with standard design pressure of 150 psig (10.34 bars), also available for design pressures of up to 300 psig (20.68 bars). The ruggedly built unit is fully automatic and has been a very reliable workhorse. The Anzen boiler is equipped with a simple but efficient pressure atomized burner, with models for light and heavy oil firing and also for gas firing.

OPTIMUM EFFICIENCY – The Enertech Anzen Boiler can attain thermal efficiencies of up to 85% at MCR when firing heavy oil (based on net calorific value of fuel). This compact unit with heating surface of 3.5 square feet per boiler horsepower can attain optimum efficiency due to its 3-pass wetback design.

FULLY AUTOMATIC OPERATION – Fully automatic control are provided for continuous operation with minimal attendance. The burner has high/low/off control for 60 and 70 HP units and full modulation control for the higher capacity units. A float-type water level controller is mounted at the side of the boiler. This controls the operation of the feedwater pump, turning it on and off at preset levels. This level controller also acts as first low water cut-off/alarm,shutting down the burner to prevent damage to the boiler, in the event of a low water condition due to failure of the feed pump or due to excessive steam withdrawal. A probe type 2nd low water cut-off to assure the safety of the boiler. The boiler operating pressure is controlled by two pressure controllers: one controlling the burner on/off operation based on the high and low operating limits and the other acting as modulating control to adjust firing rate based on steam demand.

COMPLETE SAFE OPERATION – The boiler is equipped with a burner control relay which is an automatic controller forming the nucleus of the automatic operation of the burner. This controller provides automatic burner sequencing and flame supervision for a safe burner light off and shutdown. The burner shuts down automatically in the event of flame failure, low water and excessive steam pressure. Sufficiently sized safety valves are provided to relieve pressure in case of over pressure.

“INVESTING on Enertech Boilers means keeping the much needed foreign exchange currency in the country to help stimulate the various linkages of the economy.”

SIMPLE AND RELIABLE BURNER – Olympia (Japan) Forced Draft Burners for light and heavy oil and gas firing is standard on ANZEN boilers. This ruggedly built gun-type burner has a simple design concept emphasizes perfection in ignition, complete combustion of fuel and stable flames at all firing rates. The burner has a hinged flange providing easy access to the burner components for ease of cleaning and maintenance.

Construction Features

Davited front doors and split/hinged rear doors allow access to return tubes for ease in cleaning and maintenance.
Front and rear doors are held shut using studs with lugs and brass nuts for easy removal.
Front smoke box and doors are lined with space-age ceramic fiber.
Large furnace – large diameter and sufficient length, provides required furnace volume assuring complete combustion of fuel, especially heavy oil. Furnaces are of ring-reinforced type providing a very rigid structure and at the same time additional heating surface from the stiffener rings.
Wet-back design turnaround eliminates the need for refractory lining, baffles, gaskets and provides additional primary heating surface for increased efficiency.
Two inch thick 132 kg/cu cm density mineral wool insulation reduces heat loss through the shell surfaces.
Round smoke outlet requires only a stub stack for proper draft.
Stainless steel finish for shell, to provide aesthetics and durability.


Capacities from 60 to 1500 Bo. HP (940 to 23,500 kg/h).
Operating Pressure of up to 270 psig (18.63 Bars).
High efficiency, attaining thermal efficiency of up to 93% at MCR when firing heavy oil (based on LHV) 3 pass wet-back design combined with a generous heating surface of 5 sq/ft per BoHP. Wet back design eliminates heavy refractory at rear door reducing maintenance cost.
Highly efficient full modulation U.S. made Industrial Combustion Burner, air/steam atomized burner with 5:1 turn down, attains very high combustion efficiencies even at low loads.
Large heating surface and high efficiency burner, translates into large savings in fuel cost High quality fittings and components